RCC Sheet 39
-
1) Question.
A pile of length L carrying a uniformly distributed load W per metre length is suspended at the centre and from other two points 0.15 L from either end; the maximum hogging moment will be
Answer. -
2) Question.
A pile of length L carrying a uniformly distributed load W per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is
Answer. -
3) Question.
To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distance of the points of suspension from either end, is
Answer. -
4) Question.
On piles, the drop must be at least
Answer. -
5) Question.
Piles are usually driven by
Answer. -
6) Question.
A pre-cast pile generally used, is
Answer. -
7) Question.
The advantage of a concrete pile over a timber pile, is
Answer. -
8) Question.
The zone in which transverse bending is likely to occur may be obtained by drawing a line from the faces of the column making an angle with horizontal where is
Answer. -
9) Question.
Bottom bars under the columns ae extended into the interior of the footing slab to a distance greater than
Answer. -
10) Question.
Top bars are extended to the projecting parts of the combined footing of two column L idstance apart for a distance of
Answer.
