RCC Sheet 30
-
1) Question.
According to load factor method, the premissible load W on a short column reinforced with longitudinal bars and lateral stirrups, is
Answer. -
2) Question.
The spacing of transverse reinforcement of column is decided by the following consideration.
Answer. -
3) Question.
The diameter of transverse reinforcement of colums should be equal to one-fourth of the diameter of the main steel rods but not less than
Answer. -
4) Question.
The diameter of longitudinal bars of a column should never be less than
Answer. -
5) Question.
As per IS : 456, the reinforcement in a column should not be less than
Answer. -
6) Question.
Columns may be made of plain concrete if their unsupported lengths do not exceed their least lateral dimension
Answer. -
7) Question.
An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is
Answer. -
8) Question.
If At is the gross area of steel in tension, d is the effective depth of the beam and is the depth of the centre of gravity of the resultant compression, the moment of resistance M of the beam, is given by
Answer. -
9) Question.
If the neutral axis of a T-beam is below the slab, the relationship between the flange width B, depth of neutral axis n, thickness of the slab A, and the modular ratio m may be stated as
Answer. -
10) Question.
A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis
Answer.
