RCC Sheet 29
-
1) Question.
The neutral axis of a T-beam exists
Answer. -
2) Question.
The width of the of a T-beam, is generally kept between
Answer. -
3) Question.
For the design of a simply supported T-beam the ratio of the effective span to the overll depth of the beam is limited to
Answer. -
4) Question.
Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as
Answer. -
5) Question.
A part of the slab may be considered as the flange of the T-beam if
Answer. -
6) Question.
The width of the flange of a L-beam, should be less than
Answer. -
7) Question.
The width of the flange of a T-beam should be less than
Answer. -
8) Question.
The width of the flange of a T-beam, which may be considered to act effectively with the rib depends upon
Answer. -
9) Question.
The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of
Answer. -
10) Question.
Minimum spacing between horizontal parallel reinforcement of different sizes, should not be less than
Answer.
