Railway Sheet 07
-
1) Question.
Composite sleeper index determines
Answer. -
2) Question.
If S and H are strength and hardness index of a timber at 12% moisture content, the composite sleeper index, is
Answer. -
3) Question.
Spacing of sleepers
Answer. -
4) Question.
The standard dimensions of a wooden slpper for M.G. railway track are
Answer. -
5) Question.
The standard dimensions of a wooden sleeper for a B.G. railway track are
Answer. -
6) Question.
Minimum packing space provided between two sleepers, is between
Answer. -
7) Question.
If n is length of a rail in metres, the number of sleepers per rail length generally varies from
Answer. -
8) Question.
Burnettising is done for the preservation of
Answer. -
9) Question.
Wooden sleepers used on the girders of bridges, are generally made of
Answer. -
10) Question.
Best wood for wooden sleepeers is
Answer. -
11) Question.
Normally maimum cant permissible in Metre Gauge is
Answer. -
12) Question.
The steepest gradient permissible on a curve for Broad Gauge line having ruling gradient of 1 in 200 is
Answer. -
13) Question.
The limiting value of cant deficnency for Metre Gauge routes is
Answer. -
14) Question.
Vertical curves are provided where algebraic difference between grades is equal to or
Answer. -
15) Question.
Normally the limiting value of cant is
where G is the gauge
Answer. -
16) Question.
The limiting value of cant gradient for all
Answer. -
17) Question.
The limiting value of cant excess for Broad Gauge is
Answer. -
18) Question.
The desirable rate of change of cant deficiency in case of Metre GAuge is
Answer. -
19) Question.
Pandrol clips cannot be used with
Answer. -
20) Question.
The formation width for a railway track depends on the
i) type of gauge
ii) number of tracks to be laid side by side
iii) slope of sides of embankment or cutting
The correct answer is
Answer.
